Before Use - SPIT 1630P Instrucciones Para El Manejo

BEforE usE

When unpacking, check that the delivery is complete and that there is no transport
damage.
Before using, the operators should be provided with information, instructions and
training for the use of the vacuum cleaner and the substances that it is to be used for,
including the safe procedure for the removal of the gathered material.
INDICATor AND opErATINg ELEmENTs
Select from the following functions and settings:
Vacuum cleaner is switched
0
off
I Vacuum cleaner is running
A Ready for operation
Ready for operation
AC
Automatic shaker function
Automatic shaker function
Fill level indicator * ⑥
Speed regulation * ⑦
Setting the suction hose
diameter * ⑧
(*depending on the equipment variant of your vacuum cleaner)
8
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the
connected electrical/compressed air tool* at the
plug socket.
- Automatic shaker function on; 2min
- When the container is full and/or there is a block-
age in the suction hose, the full indicator lights up.
On the m and H vacuum cleaners, an acoustic
signal is also emitted.
- The suction performance can be regulated using
the speed regulator.
- Determine the maximum negative pressure for
automatic shaking.