Introduction; Supplied Accessories; Technical Specifications; Meaning Of Leds - Bio Bronpi WIFI-1 Instrucciones De Instalación, Uso Y Mantenimiento

1.

INTRODUCTION

The WIFI 1 KIT module that you have purchased allows you to control and configure remotely, through a Smartphone by means of an app
application, the products that work with pellet from the company Bronpi Calefacción from the air series, the radio frequency series and the
hydro stoves from the radio frequency series (stoves, stoves that can be channelled, inserts, extra slim stoves, extra slim stoves that can be
channelled, hydro inserts, hydro stoves, extra slim hydro stoves, etc.), provided that there is an internet connection.
The main functions of the application are:
- Turning the stove on and off.
- Display of the operating status of the stove in real time.
- Adjustment of the working power.
- Adjustment of the air temperature (air devices) and adjustment of the water temperature (hydro devices).
- Programming the chronothermostat.
- Current temperature detected by the stove.
- Alarm condition.
- Management of several stoves through their corresponding WIFI 1 KIT modules.
- Choose your language.
2.

SUPPLIED ACCESSORIES

The WIFI KIT 1 module is composed of:
- WIFI-1 KIT module: device that connects the electronic board of the stove with the local wifi router.
- Series Connection Cable MODU II – MODU II.
- Serial Connection Cable MODU II – DSUB 9
- Two adhesive strips to fix the module.
- Power Supply.
- Installation and use instruction manual.
WIFI Module
IMPORTANT: For the insert models, Tavira, Neva and Alpes-H, we recommend the acquisition of the optional cable MODU II
– MODU II of 2 metres length (ref: 2002-04057), as well as the serial port adapter (ref: PE-176), so that the wifi module remains
outside the cover made to the insert and can correctly receive the wifi signal from your home and have a visualization to the leds
of the wifi module.
3.

TECHNICAL SPECIFICATIONS

Frequency
Power Supply
Consumption
Installation Position
Working Temperature
Maximum relative humidity
Frequency range
EIRP Level
The wifi network must not be mixed
4.

MEANING OF LEDS

The following image shows the leds that make up the module:
The meaning of the leds is as follows:
A Status Led (Green)
B Led Bluetooth status (Blue)
C Internet Status Led (Yellow)
D Remote Server Status Led (Yellow)
E Connection with the stove serial cable
F Power Supply Connector
G Reset module
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Serial Connection Cable
MODU II-MODU II
WIFI
12 V CC (via power supply unit)
0.4 W
Anyone you want.
Between 0 ºC and 50 ºC
95%
2.4 GHz – 2.5 GHz (2402 – 2472 MHz)
14/16 dBm
Power Supply
G
F
E
16
Serial Connection Cable
MODU II- DSUB 9
A BCD
REMOTE CONTROL WIFI1 MODULE