Change The Stove Location Data; Generate Service Code; Change Language; Settings - Bio Bronpi WIFI-1 Instrucciones De Instalación, Uso Y Mantenimiento

7.4.3 CHANGE THE STOVE
LOCATION DATA.
You can modify the stove location data,
just click on the toolbar and click on
"modify" which will allow you to change
the country, city and location of the stove.
7.4.4 GENERATE SERVICE
CODE
This function is not enabled in your wifi
module, so it is not useful.
7.4.5

CHANGE LANGUAGE

You can choose the language of your
application from the different options
offered: English, Spanish, French, Italian
and Portuguese. You must click on the
menu bar and select the desired one.
7.4.6

SETTINGS

You have the option to choose the mode
of connection with the wifi module:
through a wifi network or through
Bluetooth if you are near the kit. You can
also display the characters a little bigger.
This operation can also be performed on
the initial screen.
7.4.7

RESETTING THE WI-FI MODULE

To reset the wifi module, you must press the RESET button G (see section 4) for at least 5 seconds, until all the LEDs turn off. After a few
seconds, the LEDs will light up intermittently. The process will end when led A remains on steady (green).
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS 24 REMOTE CONTROL WIFI1 MODULE