Operation Of The Application; Information; Regulations - Bio Bronpi WIFI-1 Instrucciones De Instalación, Uso Y Mantenimiento

Later, go back to the APP and select
the wifi network of your home to which
you want the module to connect, and
enter the password of the selected wifi
network in the password field and click on
CONNECT:
If you have entered the correct password,
you will see at the top that the wifi kit is
connected to the wifi network in your
home (enter the password for your home
router). Then, close the screen at X and
you will see that the configuration has
been completed:
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Then, close the BRONPI HOME application and open it again. You should see the stove you have registered.
If you wish to add another stove, click on + and repeat the previous steps.
7. OPERATION OF THE
APPLICATION
The wifi module can be used with the
BRONPI HOME app from any terminal
(Smartphone, tablet, etc). Once the stove
has been registered as explained above,
it can be accessed from another terminal
without having to register the stove
again. In other words, once the stove
has been registered, it can be accessed
from any other device. This will allow the
same stove to be controlled by different
persons/devices, but these persons/
devices must use the same username
and password.
In order to access the management of
the stove, open the BRONPI HOME app,
and you will see the screen where you
will be informed of the stove(s) you have
registered:
If you click on the registered stove, you
can view and edit on three options: Information, Regulations or Chronothermostat
7.1

INFORMATION

On this screen, you can display the operating status of the stove: whether it is on or off, the working power of
the stove, the room temperature, the working phase (final cleaning, burner cleaning, etc.), and you can even
turn the stove on or off.
7.2

REGULATIONS

In this screen, you can modify the operating speed of the fan or of the channelling fans if they are optionally
installed on the stove (consult your distributor for the models that can optionally use the channelling kit). You
can modify the working power of the stove (power 1 to power 5), the day of the week, and change the room
temperature you wish to reach in the room.
21 REMOTE CONTROL WIFI1 MODULE