Filling the Filter
1
Remove the metal funnel by rotating it clockwise.
2
Fill grounded coffee into the steel mesh. A measuring spoon full of coffee powder
makes about a cup of first-class coffee.
3
Press the coffee powder tightly into the steel mesh.
4
Place the steel mesh into the metal funnel.
5
Hold the funnel below the funnel holder.
6
Lock the funnel by turning it counter-clockwise in the holder until it is tight in the
holder and the handle of the funnel points to you.
The funnel only fits in the holder in a certain way. Do not force it to fit.
Refilling the Filter
1
To fill fresh coffee into the filter hold the metal funnel by its handle and remove the
funnel from the appliance.
2
Hold the funnel and remove the residual coffee grounds. Use a food safe and heat-
resistant kitchen utensil for removing the residue to prevent the mesh from damage.
3
Fill fresh grounded coffee into the mesh.
Emptying the Filter
1
To fill fresh coffee into the filter hold the metal funnel by its handle and remove the
funnel from the appliance.
2
Hold the funnel and remove the residual coffee grounds. Use a food safe and heat-
resistant kitchen utensil for removing the residue to prevent the mesh from damage.
3
Leave the mesh and funnel to cool off completely on a heat-resistant working
surface.
ATTENTION: Do not rinse the hot mesh and funnel under cold water, as this
may damage the components.
4
After cooling off rinse them under hot running water and clean them with a food
safe detergent and soft brush.
EN
37