Time Setting; Indiglo ® Night-Light - Timex Metropolitan+ Guía Rápida

phone. You must start the synchronization process
from the Smartphone within 10 seconds, or the
Bluetooth function on the watch is switched off and
®
you will need to place the watch back into Bluetooth
mode.
After the synchronization process is completed, the
Bluetooth on the watch is switched off. Both of the
sub-dial hands will return to their positions previous
to entering the Bluetooth
application will indicate the success or failure of the
synchronization process.

TIME SETTING

NOTE: The watch crown has four positions: one temporary
push position used to activate the INDIGLO
10
mode. The Smartphone
®
night-light,
®
and three indexing positions: closed, middle and outer.
To familiarize yourself with the difference between the
various positions extend the crown to its outer position
and then push the crown very lightly until you feel it click
®
into the middle position. To set the time: Pull the crown
to its outer position and turn it until the correct time is
shown. Once the dial reflects the correct time, return the
crown to the closed position.
INDIGLO
Press the crown to activate the INDIGLO
light will remain on for 2-3 seconds after releasing the
crown.
NIGHT-LIGHT
®
night-light. The
®
11