Logitech Flight System G940 Guía De Configuración página 4

Center hat and click "Center".
Cursor Y
Select G940 Joystick from list.
Click "detect"
Move upper hat switch on stick Up and Down
Center hat and click "Center".
Radar Gain
Select G940 Throttle from list.
Click "Detect"
Move R1 fully until detected
Center R1 on detent, and click Center.
Radar Elevation
Select G940 Throttle from list.
Click "Detect"
Move R2 fully until detected
Center R2 on detent, and click "Center".
Click "OK" to return to the main game menus.
Lock On: Modern Air Combat setup Guide
Start Lock On
Click "Options"
Choose "Inputs" by clicking on dial in upper right corner of display.
Assign axes by following these steps.
1. Select Device from drop down list (G940 Joystick, G940 Throttle, G940 Pedals)
2. Click "Buttons/Axes" switch on screen to select axes.
3. Click on Axis to assign.
4. Click "Change"
5. Move the desired axis on the controller. It will be detected.
To clear an axis:
1. Select Device from drop down list (G940 Joystick, G940 Throttle, G940 Pedals)
2. Click "Buttons/Axes" switch on screen to select axes.
3. Click on Axis to clear.
4. Click "Clear". The axis will no longer be assigned in the game.
Assigning commands to buttons:
If you want to assign controls to buttons, rather than using a profile in Logitech Gaming Software:
Assign buttons by following these steps.
6. Select Device from drop down list (G940 Joystick, G940 Throttle, G940 Pedals)
7. Click "Buttons/Axes" switch on screen to select buttons.
8. Click on a command to assign.
9. Click "Change"
10. Press the button on the controller. It will be detected.
To clear a button:
5. Select Device from drop down list (G940 Joystick, G940 Throttle, G940 Pedals)