Bellman & Symfon Visit 868 Bridge Manual De Instrucciones página 21

40
as the new Bellman Visit 868 System, but the system will emit signals.
The Bellman Visit 868 Bridge also operates as a multi-function transmitter, either via a pushbutton
or via an input for an Exterior External Trigger. The Pushbutton and the Exterior External Trigger
can be detected separately and transmit different Signal Patterns to the receivers in the Bellman
Visit 868 System depending on what has activated the Bellman Visit 868 Bridge. There is a range of
options for connecting the Bellman Visit 868 Bridge to various applications.
Radio Key
On delivery all Bellman Visit and Bellman Visit 868 products are tuned to the same Radio Key. If
you have a neighbour with a similar system, you can change to different Radio Keys so that you do
not affect each other's systems. If you use the Radio Key Switch (5) to change the Radio Key on
this transmitter, you must also change all other units in your Bellman Visit 868 System and your
Bellman Visit System to the same Radio Key. Refer to the user manual for the relevant unit.
Indicators and Signals
System indicators
The LED (1) blinks, when the Bellman Visit 868 Bridge transmits or receives radio signals.
Power supply
When the Bellman Visit 868 Bridge is activated, the LED (1) normally blinks green. This means
that the back-up battery is in good condition.
If the LED (1) blinks yellow, this means that the back-up battery is flat and must be changed. Only
use a 6LR61 (alkaline) or 6F22 (lithium) type battery.
When the Bellman Visit 868 Bridge is connected to the power supply unit, the LED is constantly
green, apart from when it is receiving or transmitting radio signals when it blinks.
41
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
YU