Tabla de contenido
Publicidad
Getting started
To set up your ROG Spatha Gaming Mouse as a wired mouse:
1. Connect the micro USB cable to your ROG Spatha Gaming Mouse.
2. Connect the USB cable to your computer's USB port.
To set up your ROG Spatha Gaming Mouse as a wireless mouse:
1. Connect the micro USB cable to your wireless
receiver/charging dock.
2. Connect the USB cable to your computer's USB
port.
NOTE: Download the driver from http://www.
asus.com then install it in your computer.
3. Press the Pair button on the rear of your
wireless receiver/charging dock.
4. Slide the Power Switch to turn on your ROG
Spatha Gaming Mouse.
5. Press the Pair button on your ROG Spatha
Gaming Mouse.
6. The Dock LED indicator will light green
when your ROG Spatha Gaming Mouse has
successfully paired.
NOTE: Click on the left button to wake your ROG
Spatha Gaming Mouse from sleep mode.
To update your ROG Spatha Gaming Mouse firmware:
1. Launch ROG Armoury.
2. Connect ROG Spatha Gaming Mouse to your computer as a wired mouse.
3. Click Next on the popup window to start the firmware update.
NOTE: The popup window will only appear if there is a new firmware update available.
IMPORTANT! When you encounter a problem while updating the firmware, unplug the micro USB
cable, then press and hold down the left, right and scroll button on your mouse and replug the
micro USB cable to restart the update.
ROG Spatha Gaming Mouse
5
Publicidad
Tabla de contenido
