Activating/Deactivating The Timer; Note On The Safety Switch - Klarstein MAUNA loa 10035167 Manual De Instrucciones

EN
32
(IV) Determining the switch-off time
• If you then press the TIMER SET button, the display is switched off and the hour
starts flashing.
• Press the [+] or [-] button to set the hour.
• Keep pressing the TIMER SET button and the minute will start flashing.
• Press the [+] or [-] button to set the minute.
(V) Setting the Temperature
Then press the TIMER SET button and the set temperature will start flashing. At this
moment the temperature displayed is normally the set temperature, which can be
adjusted by pressing the [+] or [-] keys.
(VI) Continue or complete the setting
Press the TIMER SET button to proceed with the setting and press OK to complete the
setting.

Activating/Deactivating the Timer

„TIMER ON/OFF" is used to control the timer-controlled switching on and off. If you
restart the unit after a power interruption, only the original weekly timer setting is
retained.
• If the weekly timer is on, you should switch on the heating function, otherwise when
the unit is back in operation, only the flame effect will be activated.
• Repeat the same procedure to set further timer cycles if necessary after timer cycle
01 has ended.
• When the weekly timer setting is completed, the „TIMER ON/OFF function" may
be effective.

NOTE ON THE SAFETY SWITCH

This appliance has a safety switch that automatically turns off the appliance if it
overheats (for example, if the ventilation openings are blocked). For safety reasons, the
safety switch is not automatically reset. To reset, unplug the appliance from the power
outlet for at least 15 minutes. Then, plug the power plug back into the power outlet and
turn the power on.