Descargar Imprimir esta página

Technical Data; Electrical Safety; Safety In The Workplace; Personal Safety - Singercon CON.FM-1500 12L Manual De Instrucciones

Ocultar thumbs Ver también para CON.FM-1500 12L:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
EN

TECHNICAL DATA

Parameter description
Parameter value
Product name
FOG MACHINE
CON.FM
CON.FM
Model
-1500 12L
-1200
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
1500
1200
Dimensions [mm]
410x300x190
465x255x190
Weight [kg]
7,3
5,1
Capacity [L]
2,5
The amount of fog
509
453
produced [m³/min]
Fluid consumption
48
12,5
[ml/min]
Warm-up time [min]
4-5
3
12 x 3W
Red:
40-80 [Lm],
LED
-
Green:
80-150 [Lm],
Blue: 15-50 [Lm]
Smoke propagation
4-5
3-4
distance [m]
Emitted noise level
98
92
[dB]
Remote control range
Max. 20
[m]
2cm from the
2cm from the
nozzle 145°C
nozzle 140°C
Fog temperature
20cm from the
20cm from the
nozzle 45°C
nozzle 45°C
Product name
FOG MACHINE
CON.FM-
CON.FM-
CON.
Model
900B
900A
FM-900
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
900
340x150
330x210
350x200
Dimensions [mm]
x210
x185
x200
Weight [kg]
3,7
3,9
3,7
Capacity [L]
1
The amount of fog
141,6
produced [m³/min]
Fluid consumption
12,5
[ml/min]
Warm-up time [min]
3
3,5
6x3W
Red: 40-80 [Lm],
LED
-
Green: 80-150 [Lm],
Blue: 15-50 [Lm]
8
U S E R M A N U A L
Smoke propagation
2-3
distance [m]
Emitted noise level
83
82
[dB]
Remote control range
Max. 20
[m]
2cm from the nozzle 145°C
Fog temperature
20cm from the nozzle 45°C
Product name
FOG MACHINE
CON.FM-400
Model
CON.FM-500
4L
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
500
400
Dimensions [mm]
240x110x120
245x120x130
Weight [kg]
1,5
1,8
Capacity [L]
0,25
The amount of fog
28,3
produced [m³/min]
Fluid consumption
4,2-5
[ml/min]
Warm-up time [min]
3
LED
-
Smoke propagation
1-2
distance [m]
Emitted noise level
69
[dB]
Remote control range
Max. 20
[m]
2cm from the nozzle 145°C
Fog temperature
20cm from the nozzle 45°C
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to FOG MACHINE.

2.1. ELECTRICAL SAFETY

a)
The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
If working with the device outdoors, make sure to use
an extension cord suitable for outdoor use. Using an
extension cord suitable for outdoor use reduces the
risk of electric shock.
f)
If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
g)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
h)
To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
i)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
j)
Before inspecting the device or adding liquid,
disconnect the device from the power supply. Be
careful when adding smoke liquid so that it doesn't
get into the device.
EN

2.2. SAFETY IN THE WORKPLACE

a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device generates
sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h)
Use the device in a well-ventilated space.
i)
Do not point the smoke nozzle at yourself or other
persons or animals. Smoke exiting from the nozzle
can cause burns (keep a safe distance of 0.3 m).
j)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
k)
Keep packaging elements and small assembly parts in
a place not available to children.
l)
Keep the device away from children and animals.
m)
If the device is operated at height, no unauthorized
persons should be allowed near the device (risk of
slipping and injury caused by hot smoke liquid and its
residue).
n)
During installation, repairs and/or maintenance, the
area under and around the device must be protected
against unauthorized access.
o)
The device must always be additionally secured, e.g.
with a safety cable. Additional protection must be
constructed in such a way that none of the éléments
will fall in case of main protection failure.
p)
The surface on which you want to place the device
must be durable enough so that it can support device
weight without permanent deformation.

2.3. PERSONAL SAFETY

a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
9

Publicidad

loading