Stanley FATMAX FMEG210 Manual Del Usuario página 10

ENGLISH
Fitting and using wire brushes and wire wheels
(Original instructions)
Paint should be removed in such a manner as to
minimize the amount of dust generated.
thoroughly cleaned daily for the duration of the sanding
frequently.
Plastic drop cloths should be gathered up and disposed
area.
used again.
Warning!
Note:
to operate at high speed. Material removal rate is greatest
10 10
Mounting and using cutting (type 41) wheels
Mounting closed (type 41) guard (Fig. J, K, L)
Mounting cutting wheels
Warning!
sudden sharp movement of grinder may be experienced.
available. Diamond blades for concrete cutting can
also be used.
NOTE:
the operator to provide maximum operator protection as
gear case cover. You should be unable to rotate the guard
rotate the guard so that the three lugs on the guard (7)
guard.