Analyzer Memory (Refer To Fig.25) - Amprobe DM-II PLUS Manual De Uso

Symbols
CO-GENERATION
Pt, P1, P2, P3,
P12, P32
Qti, Q1i, Q2i, Q3i,
Q12i, Q32i
Qtc, Q1c, Q2c,Q3c,
Q12c, Q32c
St, S1, S2, S3,S12,
S32
Pft, Pf1, Pf2, Pf3
dpft, dpf1, dpf2,
dpf3
Eat, Ea1, Ea2, Ea3
Erit, Eri1, Eri2, Eri3
Erct, Erc1, Erc2, Erc3
Est, Es1, Es2, Es3

Analyzer Memory (Refer to fig.25)

It shows the current instrument memory, the size of the memorized data and space available
for future recordings.
Push MENU, select ANALYZER MEMORY using  Up and  Down keys.
A list of recordings and samples will be displayed with each START – STOP date in the
format "day.month".
Description
This instrument can record co-generation (the
equipment under test generates energy as well as
absorbing it).
ON = Record the powers and energies both ab-
sorbed and generated. If this flag is enabled, only
38 parameters can be selected.
OFF = Record only the powers and energies
absorbed.
Values of the active power (total, of phase 1,
phase 2 and phase 3) (only for 3PH3W) value of
the power measured by the Wattmeter 1-2 and
3-2 respectively
Values of the inductive reactive power (total, of
phase 1, phase 2, phase 3) (only for 3PH3W) value
of the reactive inductive power measured by the
VAR meters 1-2 and 3-2 respectively
Values of the capacitive reactive power (total,
phase 1, phase 2, and phase 3)
(only for 3PH3W) value of the reactive capacitive
power measured by the VA meters 1-2 and 3-2
respectively
Values of the apparent power (total, phase 1,
phase 2,and phase 3)
(only for 3PH3W) value of the power measured
by the VA meters 1-2 and 3-2 respectively
Values of the power factors (total, of phase 1,
phase 2 and phase 3 respectively)
Values of the cosϕ (total, of phase 1, phase 2 and
phase 3 respectively)
Values of the active energy (total, of phase 1,
phase 2, phase 3)
Values of the inductive reactive energy (total, of
phase 1, phase 2 and phase 3)
Values of the capacitive reactive energy (total, of
phase 1, phase 2, phase 3)
Values of the Apparent Energy (total, of phase 1,
phase 2, phase 3)
18
Advised Settings
Single phase: P1
3 wires: Pt
4 wires: Pt, P1, P2,
P3
Single phase: Q1i
Q1c
3 wires: Qti Qtc
4 wires: Qti Q1i
Q2i, Q3iQtc Q1c
Q2c, Q3c
Single phase: S1
3 wires: St
4 wires: St, S1, S2,
S3
Single phase: Pf1
dPf1
3 wires: Pft dPft
4 wires: Pft Pf1 Pf2
Pf3dPft dPf1 dPf2
dPf3
Single phase: Ea1
3 wires: Eat
4 wires: Eat Ea1 Ea2
Ea3
Single phase: Eri1
Erc1
3 wires: Erit Erct
4 wires: Erit Eri1
Eri2 Eri3Erct Erc1
Erc2 Erc3
Single phase: Es1
3 wires: Est
4 wires: Est Es1 Es2
Es3