CRATONI Rearlight Modo De Uso página 15

3. FUNCTIONS
The LED rear light has three different functions that can be used as you like (Fig. A2).
Press once: Permanent light
Press twice: Flashing light
4. CHANGING THE BATTERY (FIG. A4)
The LED rear light is already equipped with a CR 2025 (3V)
battery at the time of purchase.
• To replace this battery, remove the LED light's silicone cover and remove the two screws
on the side using a small screwdriver.
• Then disassemble the housing, replace the battery and reassemble the housing.
• Now reattach the housing using the two screws (Fig. A4).
USER INSTRUCTIONS FOR LED REAR LIGHT [C/F]
1. BEFORE USING IT FOR THE FIRST TIME
Remove the safety strip from the LED rear light before using it for the first time (Fig. C/F1).
2. REMOVING AND ATTACHING THE REAR LIGHT
Not necessary with this rear light because it is built into the size adjustment system.
3. FUNCTIONS
The LED rear light has four different functions that can be used as you like (Fig. C/F2).
Press once: Permanent light
Press twice: Flashing light
4. CHANGING THE BATTERY (FIG. C/F3)
The LED rear light is already equipped with a CR2025 (3V)/
CR1225 (3V) battery at the time of purchase.
• To replace this battery, loosen the five screws on the front of the rear light with a
screwdriver.
• Carefully remove the black washer and the circuit board underneath.
• The new battery can now be inserted into the holder provided on the back of the circuit
board.
• Replace the board and the black washer one after the other and screw them together
with the five screws (Fig. C/F3).
Press three times: Chase light
Press four times: Light off
Battery type: CR 2025 (3 V),
LED class 1
Press three times: Chase light
Press four times: Light off
Battery type: CR2025 (3V)/ CR1225
(3V), LED class 1
7