SEVERIN CY 7088 Instrucciones De Uso página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
∙ Pointy objects such as glass splinters, needles or constructionwaste.
∙ Fine dust, such as plaster, cement, fine drilling dust, powder.
CE Marking
This device is compliant with the mandatory EU directives for CE marking.
Before using for the first time
∙ Remove any remaining packaging or inserts from the appliance.
∙ Assemble the appliance as shown below and check that the dust container and filters are fitted correctly (also see the
sections on "Emptying the dust container" and "Cleaning or replacing the filter").
Assembling
∙ Only assemble appliance parts when the plug has been disconnected from the mains socket.
∙ If necessary, push the dust container into the appliance until you hear it click into place.
∙ Attach the hose to the appliance and lock it in place with a quarter turn.
∙ Push the telescopic tube onto the hose until you hear a click and adjust it to the required length.
∙ Select the right nozzle for the surface to be vacuumed:
∙ Never use a damaged nozzle. A damaged nozzle could cause scratching of surfaces.
Using the appliance
The switchable floor nozzle has 2 settings:
Position 1 is excellently suited to cleaning dirt and fibres fromcarpets, rugs etc. and
for deep cleaning of these surfaces.
Position 2 is ideal for all kinds of smooth hard floors.
With the brush folded, the 2-in-1 tool is perfect for sofa crevices and other areas that
are difficult to reach.
With the brush unfolded, it is ideal for vacuuming your furniture.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido