Black and Decker AS6NG Guia De Inicio Rapido

AS6ng ALkALinE BAttERy
ScREwDRivER
inStRuction mAnuAL
thank you for choosing Black & Decker!
go to www.BlackandDecker.com/newowner
to register your new product.
PLEASE READ BEfoRE REtuRning thiS
PRoDuct foR Any REASon:
If you have a question or experience a problem
with your Black & Decker purchase, go to
httP://www.BLAckAnDDEckER.com/inStAntAnSwERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri.
to speak with an agent.
Please have the catalog number available when you call.
kEy infoRmAtion you ShouLD know:
• to oPERAtE: Rotate the collar to the position marked
. Press the button on the right side of the screwdriver to operate
in forward mode; press the button on the left side to operate in
reverse. Rotate the collar to the position marked to use as a
conventional non-powered screwdriver.
• to inStALL A Bit : Insert bit firmly into the cavity in the spindle
until it snaps into place. If the bit does not fit into the spindle, rotate
the bit and re-insert it.
• Use only with AA alkaline batteries.
SAvE thiS inStRuction mAnuAL foR futuRE REfEREncE.
vEA EL ESPA—oL En LA contRAPoRtADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADvERtEnciA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
cat no. AS6ng form no. 90588116
copyright © 2012 Black & Decker
SAfEty guiDELinES - DEfinitionS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below
are used to help you recognize this information.
DAngER:
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
wARning:
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
cAution:
Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
noticE:
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
general Safety Rules
wARning: Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAvE ALL wARningS AnD inStRuctionS foR futuRE REfEREncE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) woRk AREA SAfEty
a) keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) ELEctRicAL SAfEty
a) Power tool plugs must match the outlet. never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. never use the cord for carrying, pulling or unplugging the
power tool. keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
e) when operating a power tool outdoors, use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) if operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (gfci) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSonAL SAfEty
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) use personal protective equipment. Always wear eye protection. Protective equip-
ment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) if devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection can
reduce dust-related hazards.
4) PowER tooL uSE AnD cARE
a) Do not force the power tool. use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfa-
miliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) maintain power tools. check for misalignment or binding of moving parts, break-
age of parts and any other condition that may affect the power tool's operation.
if damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be per-
formed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
5) BAttERy tooL uSE AnD cARE
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
b) use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) when battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d) under abusive conditions, liquid may be ejected from the battery, avoid contact. if
contact accidentally occurs, flush with water. if liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
6) SERvicE
a) have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SPEcific SAfEty RuLES
• Hold power tool by insulated grippng surfaces, when performing an operation where
the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
The label on your tool may include the following symbols.
V ........................... volts
Hz ......................... hertz
min ........................ minutes
.../min .................... revolutions or reciprocations per minute
wARning: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the State of california to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
wARning: fire or burn hazard. Batteries can explode or leak, and can cause injury
JunE 2012
or fire. To reduce this risk:
Printed in china
• Carefully follow all instructions and warnings on the battery label and package.
• Always insert batteries correctly with regard to polarity (+ and -), marked on the battery and
the equipment.
• Do not short battery terminals.
• Do not recharge.
• Do not mix old and new batteries. Replace all of them at the same time with new batteries of
the same brand and type.
• Remove dead batteries immediately and dispose of per local codes.
• Do not dispose of batteries in fire.
• Keep batteries out of reach of children.
• Remove batteries if the device will not be used for several months.
Transporting batteries can possibly cause fires if the battery terminals inadvertently come
in contact with conductive materials such as keys, coins, hand tools and the like. The US
Department of Transportation Hazardous Material Regulations (HMR) prohibits transporting
batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS
they are properly protected from short circuits. So when transporting individual batteries, make
sure that the battery terminals are protected and well insulated from materials that could contact
them and cause a short circuit. notE: Batteries should not be put in checked baggage.
A
C
Position Instructions
Directives concernant la position
des piles
Instrucciones de posición de
funcionamiento
E
fEAtuRES (figuRE A)
1. Switch (forward direction)
2. Switch (reverse direction)
3. Bit holder
4. Spindle lock collar
5. Battery holder
BAttERy inStALLAtion
The AS6NG screwdriver uses four size AA alkaline batteries only.
To install batteries in your tool, remove the end cap by depressing the two tabs, as shown
in Figure B. Pull the end cap out of the tool, as shown in Figure C, and observe the battery
position instructions printed on the battery holder. (The plus and minus ends of the batteries
are marked with + and - signs.) notE: Some battery manufacturers mark only the plus (+)
ends of the batteries. In these cases, the unmarked end of the battery is the (-) end. Install
the batteries as indicated and reinstall the cap.
...................... direct current
.......................... Class II Construction
........................ safety alert symbol
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
A ......................... amperes
W ........................ watts
.......................alternating current
n o ....................... no load speed
........................ earthing terminal
B
D
F