Service And Maintenance - Festool SYSLITE KAL II Manual De Instrucciones Original

Tripod
A standard photographic tripod with UNC
1/4"-20 thread can be attached to the
threaded tripod socket [2-1].
Magnetic foot with spherical head (part
accessories) [4]
Strong magnetic fields
may damage or destroy
electronic or mechanical
elements and devices The same also ap-
plies to cardiac pacemakers. The re-
quired safety distances can be found in
the manuals of these devices.
Risk of pinching fingers and
hands at the magnet!

Check the area at the magnetic foot
before use and clean if necessary.
Only use the magnetic foot for securing
the Festool working light using one of the
options described below:
Screw on magnetic foot at the tripod
socket [2-1]. This can be rotated in all di-
rections by loosening the clamping
screw [4-1].
Secure the magnetic foot using one of
three options:
[4A] Secure with a clamp
[4B] Magnetic mounting at the
screwed-on adapter plate
[4C] Magnetic mounting with the
adapter plate screwed to its stand
7

Service and maintenance

Customer service and repair
only by manufacturer or ser-
vice workshops: Find your
nearest address online at
www.festool.com/service
Always use original Festool
EKAT
4
spare parts! Order no. at:
5
3
2
1 www.festool.com/service
–Always clean the plastic cov-
er on the working light using a soft,
dry cloth to prevent any damage. Do
not use solvents.
– Keep the contacts on the working
light and battery pack clean.
– Always appoint an authorised service
workshop to replace damaged inte-
gral batteries.
8 Environment
Prior to disposal
Remove the integral bat-
tery from the device! Dis-
mantle the housing compo-
nents and remove the bat-
tery. Dispose of the battery
using our return service.
Do not dispose of electric power tools in
household waste! Recycle devices, ac-
cessories and packaging. Observe appli-
cable country-specific regulations.
EU only: In accordance with European
Directive on waste electrical and elec-
tronic equipment and implementation in
national law, used electric power tools
must be collected separately and handed
in for environmentally friendly recycling.
KAL II
GB
15