Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex L 3709-115 Instrucciones De Funcionamiento Originales

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . . 14
For your safety . . . . . . . . . . . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Operating instructions . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 22
Disposal information . . . . . . . . . . . . . . . 23
-Declaration of Conformity . . . . . . . . 23
Exemption from liability . . . . . . . . . . . . . 23

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Protection class II
(completely insulated)
Disposal information for the old
machine (see page 23)!
14
L 3709 -115, L 3709 -125, LE 9-10 125, L 10-10 125, L 801, L 1001

For your safety

WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

This angle grinder
- for commercial use in industry and trade,
- is designed for dry grinding and cutting
metal and stone,
- a special cutting guard is required
for cutting,
- is designed for use with grinding tools
and accessories which are indicated
in this manual or recommended by the
manufacturer and which are permitted to
run at a circumferential speed of 80 m/s.
Not permitted are e.g. chain cutting wheels,
saw blades.

Safety instructions

WARNING!
Read all safety warnings, instructions, illu-
strations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future
reference.
no.: 315.915),
-