Flex SK 602 VV Manual De Instrucciones página 20

Switching the reciprocating saw
on and off
The saw features an accelerator switch with
soft start and a stroke number stabiliser.
This allows the stroke number to be increased
slowly to the preset stroke number value.
`^rqflk>
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇJçå=
ã~ÅÜáåÉ=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK
Brief operation without engaged
switch rocker:
 Press and hold down the switch.
 To switch off, release the switch.
Continuous operation with engaged
switch rocker:
 Press and hold down switch (1.).
 To lock into position, hold down the locking
button and release the switch (2.).
20
 To switch off, briefly press and release
the switch (3.).
Stroke number control
 To set the stroke number, move the thumb
wheel to the required value.
The appropriate stroke number depends
on the material to be processed and can
be determined by performing test cuts.
In general, select a high stroke number for
cutting wood.
A lower stroke number is required for cutting
metal and plastic.
SR 602 VV/SK 602 VV