– Do not pull the power cable against cutting edges, attach it to anything or let it hang loose.
– Keep the power cable away from heat and humidity.
– If the power cable is damaged, it must be replaced by the manufacturer, its After-sales
Service or equally qualified people.
– If the power cable is damaged, do not use the machine.
– If an electrical extension lead is necessary, only use an earthed cable, whose conductor has
a cross-section of at least 1.5 mm.
– To prevent dangerous damage, never place the machine on or next to hot surfaces such as
radiators, cookers, ovens, gas stoves, naked flames or similar heat sources.
– Always place it on a horizontal surface which is stable and even. The surface must be
resistant to heat and fluids such as: water, coffee, limescale remover, etc.
– Unplug the machine from the power socket when it is not going to be used for a prolonged
period.
– Unplug the machine by pulling from the plug rather than the power cable so that you do not
damage it.
– Before cleaning and maintaining your machine, unplug it from the power socket and let it
cool down.
– Never touch the power cable with wet hands.
– Do not immerse the machine, either as a whole or in part, in water or any other liquids.
– Never place the machine or any part of it in a dishwasher.
– Together, electricity and water are dangerous and may cause fatal electric shocks.
– Do not open the machine. Internal voltage dangerous.
– Do not place anything in the openings. This could cause a fire or electric shock.
– Unplug the machine and let it cool down before cleaning it. To clean the waste collector,
water reservoir, drainage plate, grille and percolator, use water and a mild detergent.
– Do not use the machine for any purpose other than those for which it is intended. Misusing
the machine may cause injury.
– The surface of the element will remain hot for a certain length of time after use. Do not touch
hot surfaces. Use the levers or buttons provided.
– The coffee maker shall not be placed in a cabinet when in use
13