Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cequent
Performance Products, Inc.
Website: www.cequentgroup.com
Technical Assistance: 800-632-3290
TechnicalSupport@cequentgroup.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1589 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Installation Instructions
PART NUMBERS: 76170, 84170, CQT76170
Max Tongue
Weight
Weight
525 lb. (238 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
1.
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 24
Scan for step by step
PHOTO installation
instruction or visit
http://www.cequentg
roup.com/qr-
product.aspx
76170NP
06-01-17
Rev. A

Publicidad

loading

Resumen de contenidos para Cequent Performance Products 76170

  • Página 1 TechnicalSupport@cequentgroup.com product.aspx LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Cequent Performance Products, Inc. ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: product will be free from material defects in both material and workmanship, ordinary wear •...
  • Página 2: Installation Instructions

    Scan for step by step ™ Cequent Performance Products, Inc. Installation Instructions PHOTO installation instruction or visit Website: www.cequentgroup.com http://www.cequentg PART NUMBERS: 76170, 84170, CQT76170 Technical Assistance: 800-632-3290 roup.com/qr- product.aspx TechnicalSupport@cequentgroup.com Applications: Installation Time: 80 min Years Make Models The time listed above is the average time for professional installers.
  • Página 3 Fastener Kit: 76170F Always wear SAFETY GLASSES Installation Instructions when installing hitch ① Qty. (6) Conical washer 1/2’’ PART NUMBERS: 76170, 84170, CQT76170 Part #: 01292008 Weldnuts ② Qty. (6) Bolt M12 1.25 x 35, CL8.8 5.5’’ 3.5’’ Figure 2 Frame rails 1.0’’...
  • Página 4 1. Remove bottom appearance panel and mud flaps - use phillips screwdriver, panel removal tool, and 10 mm socket to remove (4) rivets, and (2) screws from bottom appearance panel on driver side. Remove mud flap each side if present. Keep the bottom panel and mud flaps for reinstallation. Model with mud flap ©2017 Cequent™...
  • Página 5 1. Remove bottom appearance panel and mud flaps - use phillips screwdriver, panel removal tool, and 10 mm socket to remove (4) rivets, and (2) screws from bottom appearance panel on driver side. Remove mud flap each side if present. Keep the bottom panel and mud flaps for reinstallation. Model without mud flap ©2017 Cequent™...
  • Página 6 2. Remove bumper fascia - (a) use panel removal tool to remove (2) plastic rivets from bottom center fascia. For model with hands-free liftgate, there will be (6) plastic rivets. (b) use phillips screwdriver to remove (3) screws from wheel well liner each side. (c) open the trunk and use 3/16’’ or 5 mm hex bits to remove (2) flat head screws each side. (d) using plastic trim tools, gently remove the plastic fascia starting at the outer edges near the wheel wells.
  • Página 7 3. Lower exhaust pipe- use exhaust removal pliers to lower the 4. Install hitch – raise the hitch into position and carefully slide it over passenger side exhaust pipe temporarily. Use a support or bungee cord to keep exhaust pipe first. Loosely install M12 bolts ② and conical washers ① to the hitch. muffler from getting damaged.
  • Página 8 6. Trim bumper fascia and bottom appearance panel - locate the center of bottom bumper fascia and trim 3.5’’ tall by 5.5’’ wide area, see Figure 2. Trim the bottom appearance panel as shown in Figure 3. 7. Reinstall all fasteners, fascia, exhaust, appearance bottom panel, and mud flaps removed in Step 1, 2, 3. 5.5’’...
  • Página 9: Garantie À Vie Limitée

    CQT76170 GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Cequent Performance Products, Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES exempt de vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 10 Numériser pour des ™ Cequent Performance Products, Inc. Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.cequentgroup.com http://www.cequentgr NUMÉROS DE PIÈCES : 76170, 84170, Assistance technique: 800-632-3290 oup.com/qr- TechnicalSupport@cequentgroup.com CQT76170 product.aspx Applications : Durée de l'installation : 80 min Années...
  • Página 11 Toujours porter des LUNETTES Instructions d’installation Visserie : 76170F DE PROTECTION lors de l'installation de l'attelage. NUMÉROS DE PIÈCE : 76170, 84170, CQT76170 ① Qté (6) Rondelle conique 1/2’’ No pièce : 01292008 Écrous soudés ② Qté (6) Boulon M12 1.25 x 35, CL8.8...
  • Página 12 1. Enlever le panneau décoratif inférieur et le garde-boue - Utiliser un tournevis cruciforme, un écarteur de panneau et une douille 10 mm pour retirer quatre (4) rivets et deux (2) vis du panneau décoratif inférieur côté conducteur. Enlever le garde-boue de chaque côté s'il est présent. Conserver le panneau inférieur et les garde-boue pour réinstallation. Model with mud flap ©2017 Cequent™...
  • Página 13 1. Enlever le panneau décoratif inférieur et le garde-boue - Utiliser un tournevis cruciforme, un écarteur de panneau et une douille 10 mm pour retirer quatre (4) rivets et deux (2) vis du panneau décoratif inférieur côté conducteur. Enlever le garde-boue de chaque côté s'il est présent. Conserver le panneau inférieur et les garde-boue pour réinstallation. Model without mud flap ©2017 Cequent™...
  • Página 14 2. Enlever le carénage de pare-chocs – (a) Utiliser l'écarteur de panneau pour retirer deux (2) rivets en plastique du centre inférieur du carénage. Les modèles à hayon mains-libres comportent six (6) rivets en plastique. (b) Utiliser un tournevis cruciforme pour retirer trois (3) vis de la doublure de passage de roue, de chaque côté. (c) Ouvrir le coffre et utiliser des embouts hexagonaux 3/16 po ou 5 mm pour retirer deux (2) vis à...
  • Página 15 3. Abaisser le tuyau d’échappement - Utiliser des pinces pour 4. Installer l’attelage – Soulever l’attelage en position et le glisser avec précaution par-dessus le tuyau échappement pour abaisser le tuyau d’échappement d’échappement côté passager en premier. Poser lâchement des boulons M12 ② et des rondelles temporairement.
  • Página 16 6.Découper le carénage de pare-chocs et le panneau décoratif inférieur – Repérer le centre du carénage de pare-chocs inférieur et découper une zone de 3,5 po de hauteur par 5,5 po de largeur, voir la Figure 2. Découper le panneau décoratif inférieur comme illustré à la Figure 3. 7.
  • Página 17: Garantía Limitada De Por Vida

    Escanear para Cequent Performance Products, Inc. Instrucciones de instalación instrucciones de la Sitio web: www.cequentgroup.com instalación paso por paso NÚMEROS DE PARTES: 76170, 84170, con FOTO, o visitar Assistance técnica: 800-632-3290 http://www.cequentgrou TechnicalSupport@cequentgroup.com CQT76170 p.com/qr-product.aspx GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía")
  • Página 18 Escanear para ™ Cequent Performance Products, Inc. Instrucciones de instalación instrucciones de la instalación paso por paso Sitio web: www.cequentgroup.com NÚMEROS DE PARTES: 76170, 84170, con FOTO, o visitar Assistance técnica: 800-632-3290 http://www.cequentgrou CQT76170 TechnicalSupport@cequentgroup.com p.com/qr-product.aspx Aplicaciones: Tiempo de instalación: 80 min Años...
  • Página 19 Instrucciones de instalación Siempre usar GAFAS DE Kit de fijadores: 76170F SEGURIDAD al instalar el enganche NÚMEROS DE PARTE: 76170, 84170, CQT76170 ① Cant. (6) Arandela cónica 1/2" Tuercas de No. parte 01292008 soldar ② Cant. (6) Perno M12 1.25 x 35, CL8.8 5.5’’...
  • Página 20 1. Extraer el panel de apariencia inferior y de las solapas de barro: Usar un destornillador de estrella, herramienta de eliminación de paneles y un cubo de 10 mm para extraer (4) remaches y (2) tornillos del panel de apariencia inferior en el lado del conductor. Retirar la solapa de barro en cada lado si está presente. Guardar el panel inferior y las solapas de barro para la reinstalación.
  • Página 21 1. Extraer el panel de apariencia inferior y de las solapas de barro: Usar un destornillador de estrella, herramienta de eliminación de paneles y un cubo de 10 mm para extraer (4) remaches y (2) tornillos del panel de apariencia inferior en el lado del conductor. Retirar la solapa de barro en cada lado si está presente. Guardar el panel inferior y las solapas de barro para la reinstalación.
  • Página 22 2. Extraer la fascia del parachoques: (a) Usar la herramienta de eliminación de paneles para extraer (2) remaches plásticos de la fascia central inferior. Para el modelo con puerta levadiza manos libres, habrá (6) remaches plásticos. (b) Usar un destornillador de estrella para quitar (3) tornillos del forro del receptáculo de la rueda en cada lado. (c) Abrir el maletero y usar brocas hexagonales de 3/16"...
  • Página 23 3. Bajar el tubo de escape: Usar alicates de extracción para bajar el 4. Instalar el enganche: Levantar el enganche a su posición y deslizarlo con cuidado hacia el tubo de tubo de escape temporalmente. Usar un soporte o correa para escape del lado del pasajero primero.
  • Página 24 6. Recortar la fascia del parachoques y el panel de apariencia inferior: Localizar el centro de la fascia del parachoques inferior y recortar un área de 3.5’’ de alto por 5.5’’ de ancho, ver la Figura 2. Recortar el panel de apariencia inferior como se muestra en la Figura 3. 7.

Este manual también es adecuado para:

84170Cqt76170