Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cequent
Performance Products, Inc.
www.cequentgroup.com
Technical Assistance:
TechnicalSupport@cequentgroup.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
7000 lb. (3178 kg)
Weight Distributing
7000 lb. (3178 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Installation Instructions
800-632-3290
PART NUMBERS: 76141, 84141, CQT76141
Max Tongue
Weight
Weight
700 lb. (318 kg)
700 lb. (318 kg)
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
1.
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 21
Scan for safe
towing tip, or visit
http://www.ceque
ntgroup.com/qr-
product.aspx
76141NP
2-17-17
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Cequent Performance Products 76141

  • Página 1 TechnicalSupport@cequentgroup.com product.aspx LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Cequent Performance Products, Inc. ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: product will be free from material defects in both material and workmanship, ordinary wear and tear excepted.
  • Página 2: Installation Instructions

    ™ Cequent Performance Products, Inc. Installation Instructions www.cequentgroup.com PART NUMBERS: 76141, 84141, 800-632-3290 Technical Assistance: TechnicalSupport@cequentgroup.com CQT76141 Applications: Installation Time: 40 min. Years Make Models The time listed above is the average time for professional installers. If you do not...
  • Página 3 Always wear SAFETY GLASSES Fastener Kit: 76141F Installation Instructions when installing hitch ① Qty. (2) Hex Bolt PART NUMBERS: 76141, 84141, CQT76141 ½”-13 x 3.5” Gr5 ② Qty. (6) Conical washer Existing M10 nuts 1/2 ’’ Conical Washer Teeth side against Qty.
  • Página 4 Remove bumper fascia brackets – Remove (3) bumper fascia brackets by removing the Remove DEF Tank shield – (BlueTec vehicles only) Remove (6) M10 plastic flange nuts . (4) 10mm screws in the lower bumper fascia tabs and (5) 10mm nuts. 2014 and newer models remove (3) bolts using a 10mm socket to remove the center fascia support bracket.
  • Página 5 Lower DEF tank - (BlueTec vehicles only) Remove the rearmost bolt holding the DEF Remove lower bumper bolts - Remove the lower (2) bolts securing the bumper to the tank and the rearmost nut securing strap using a 13mm socket. Be sure to support the vehicle using a 10mm socket.
  • Página 6 BlueTec vehicles only – raise DEF tank and secure the mounting strap using the Raise the bolt plate into position and install the supplied carriage bolts through the hardware that was removed in step 5. Secure the DEF tank mounting tab using the square holes in the hitch and into the slots of the bolt plate then install the conical hardware removed in step 5.
  • Página 7 Trim and Reinstall DEF tank shield – (BlueTec vehicles only) Trim 4” from inboard edge of shield (Figure 3)Reinstall DEF tank shield removed in step 1. Secure fascia tabs - Using the cable ties provided attach the fascia tabs to the hitch cross tube.
  • Página 8: Garantie À Vie Limitée

    GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Cequent Performance Products, Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES exempt de vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 9: Équipement Requis

    Cequent ™ Performance Products, Inc. Instructions d’installation www.cequentgroup.com NUMÉROS DE PIÈCES : 76141, 84141, 800-632-3290 Assistance technique : CQT76141 TechnicalSupport@cequentgroup.com Applications : Durée de l'installation : 40 min. Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 10 Toujours porter des LUNETTES DE Visserie : 76141F PROTECTION lors de l'installation ① Qté (2) Hex Bolt de l'attelage. NUMÉROS DE PIÈCE : 76141, 84141, CQT76141 ½”-13 x 3.5” Gr5 ② Qté (6) Rondelle conique Écrous M10 existants 1/2 ’’...
  • Página 11 Enlever les supports du carénage de pare-chocs – Enlever trois (3) supports de carénage Enlever l'écran de protection du réservoir de liquide d'échappement diésel – de pare-chocs en retirant quatre (4) vis des languettes du carénage de pare-chocs (Modèles BlueTec seul.) Retirer six (6) écrous à embase en plastique à l'aide d'une inférieur et cinq (5) écrous à...
  • Página 12 Abaisser le réservoir de liquide d'échappement diésel - (Modèles BlueTec seul.) Enlever la poutre de pare-chocs – À l'aide d'une douille 16mm, retirer huit (2) boulons Retirer le boulon le plus à l'arrière en maintenant le réservoir et l'écrou le plus à M8, quatre (4) par côté, qui fixent la poutre de pare-chocs au panneau d'extrémité.
  • Página 13 BlueTec vehicles only – raise DEF tank and secure the mounting strap using the Raise the bolt plate into position and install the supplied carriage bolts through the hardware that was removed in step 5. Secure the DEF tank mounting tab using the square holes in the hitch and into the slots of the bolt plate then install the conical hardware removed in step 5.
  • Página 14 Découper et réinstaller l'écran de protection du réservoir de liquide d'échappement diésel – (Modèles BlueTec seul.) Découper 4 po depuis le bord intérieur de l'écran (Figure 3). Réinstaller l’écran du réservoir enlevé à l’étape 1. Fixer les languettes de carénage – À l'aide des attaches de câble fournies, attacher les languettes de carénage au tube de traverse de l'attelage.
  • Página 15: Garantía Limitada De Por Vida

    CQT76141 GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Cequent Performance Products, Inc. ("nosotros", Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nos" o "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 16: Aplicaciones

    ™ Cequent Performance Products, Inc. Instrucciones de instalación www.cequentgroup.com Asistencia técnica: 800-632-3290 NÚMEROS DE PARTES: 76141, 84141, CQT76141 TechnicalSupport@cequentgroup.com Aplicaciones: Tiempo de instalación: 40min. Años Marca Modelos El tiempo indicado anteriormente es el tiempo promedio para instaladores 2012-2015 Mercedes ML350 profesionales.
  • Página 17 Siempre usar GAFAS DE SEGURIDAD Kit de fijadores: 76141F Instrucciones de instalación al instalar el enganche ① Cant. Perno hexagonal NÚMEROS DE PARTE: 76141, 84141, ½”-13 x 4” Gr5 ② Cant. Arandela cónica CQT76141 1/2’’ Tuercas de soldar existentes M10 Cant.
  • Página 18 Desmontar los soportes de la fascia del parachoques: - Extraer (3) soportes de la fascia Quitar el protector del tanque de DEF (solo los vehículos BlueTec): Extraer (6) tuercas del parachoques al quitar (4) tornillos en las lengüetas de la fascia del parachoques de brida de plástico usando una llave de 10 mm.
  • Página 19 Bajar el tanque de DEF (solo vehículos BlueTec): Quitar el perno más posterior que Quitar los pernos inferiores del amortiguador: Retirar los (2) pernos inferiores que sujeta el tanque de DEF y la tuerca más posterior que sujeta la correa con una llave de sujetan el parachoques al vehículo con una llave de 16 mm.
  • Página 20 Levantar la placa de pernos a su posición e instalar los pernos de carruaje suministrados a través Solo vehículos BlueTec: Levantar el tanque de DEF y fijar la correa de montaje usando las piezas de los orificios cuadrados en el enganche y en las ranuras de la placa de pernos, luego, instalar las que se quitaron en el paso 5.
  • Página 21 Recortar y reinstalar el protector del tanque de DEF (solo vehículos BlueTec): Recortar 4" desde el borde interior del protector (Figura 3) Volver a instalar el protector del tanque de DEF que se quitó en el paso 1. Asegurar las lengüetas de la fascia: Usando los amarres de cables que se suministran, unir las lengüetas de la fascia al travesaño del enganche.

Este manual también es adecuado para:

84141Cqt76141

Tabla de contenido