Abbott FreeStyle Libre 2 Guía De Referencia Rápida página 8

What to know about the System:
The FreeStyle Libre 2 System is intended for use by a single person. It must not
be used by more than one person due to the risk of misinterpreting glucose
information.
FreeStyle Libre 2 app and FreeStyle Libre 2 Readers do not share data.
What to know before you Apply the Sensor:
The Sensor Pack and Sensor Applicator are packaged as a set (separately from
the Reader) and have the same Sensor code. Check that the Sensor codes
match before using your Sensor Pack and Sensor Applicator. Do not use Sensor
Packs and Sensor Applicators with different Sensor codes together as this will
result in incorrect glucose readings.
Wash application site on the back of your upper arm using a plain soap, dry,
and then clean with an alcohol wipe. This will help remove any oily residue that
may prevent the Sensor from sticking properly. Allow site to air dry before
proceeding. Carefully preparing the site according to these instructions will
help the Sensor stay on your body for the full 14 day wear period and help
prevent it from falling off early.
Clean hands prior to Sensor handling/insertion to help prevent infection.
Change the application site for the next Sensor application to prevent
discomfort or skin irritation.
Only apply the Sensor to the back of the upper arm. If placed in other areas,
the Sensor may not function properly.
Select an appropriate Sensor site to help the Sensor stay attached to the body
and prevent discomfort or skin irritation. Avoid areas with scars, moles, stretch
marks, or lumps. Select an area of skin that generally stays flat during normal
daily activities (no bending or folding). Choose a site that is at least 1 inch away
from an insulin injection site.
When is Sensor Glucose different from Blood Glucose:
Physiological differences between the interstitial fluid and capillary blood may
ART44418-001_rev-A 2:50pm 07-Jun-2021