Technical Parameters; Safety Recommendations - YATO YT-7290 Manual Original

PROPERTIES OF THE DEVICE
The industrial videoscope is a portable inspection device. It permits to see hardly accessible areas by means of a miniature
camera connected with a fl exible cable to a LCD colour screen whose diagonal is 89 or 61 mm. The camera of the device is
equipped with autonomous illumination based upon white LEDs, which permits to work even in total darkness.
COMPONENTS OF THE DEVICE
The device is supplied complete and it does not require assembly, apart from connection of a battery. Long with the device
auxiliary terminals for the camera are supplied: with a hook, a mirror and a magnet.

TECHNICAL PARAMETERS

Parameter
Catalogue number
Power supply
Type of screen
Diagonal of the screen
Defi nition of the screen
Screen refresh rate
Diameter of the camera
Range of vision of the camera
Range of the camera
Lighting of the camera
Length of the camera cord
Working temperature
Relative humidity at the place of work
Maximum working time
Weight (without the battery)
* battery is not provided with the product

SAFETY RECOMMENDATIONS

NOTE! Read carefully the following instructions before you commence work. Should the recommendations be not observed, there
is a risk of an electric shock, fi re or injuries.
The place of work must be properly lit and clean. Untidiness and poor lighting may be a cause of accidents.
Do not use the device in an explosive environment which contains infl ammable liquids, gases or vapours.
Do not use the device in the vicinity of corrosive chemicals; they may impair the obtained picture.
Do not remove any labels from the device.
Do not permit children or unauthorised persons to the place where the device is being operated. A loss of concentration may lead
to a loss of control over the tool.
Always use personal protection means appropriate to the work being executed, such as protective glasses or goggles, gloves,
hearing and head protection, protective clothes and shoes.
Do not strive to reach anything, always maintain balance. A loss of balance may lead to an electric shock, fi re or injuries.
The device must be kept away from any liquids. The device is not hermetic and any contact with liquids may imply damage to the
tool and lead to an electric shock or injuries.
Do not use the device for the purposes related to investigation of human or animal organisms. The product has not been designed
for any medical applications.
The product is not shock-resistant. Do not place the device on unstable tables or other unstable surfaces, from which it might
fall. Do not drop anything on the device. Mechanical damage caused by failure to observe the safety recommendations are not
covered by the guarantee and may increase the risk of injuries.
Before you commence the maintenance of the device, remove the battery. Remove the battery also if the device is meant to be
stored for a prolonged period of time. Do not expose the battery to high temperatures, do not dispose in fi re, do not overheat. If
exposed to a high temperature the battery may explode, which may lead to serious injuries and burns.
The device should be stored in the unit package it is supplied in. The device should be stored in a dry, well ventilated place, away
from reach of children.
8
Measurement unit
O R I G I N A L
GB
-
[V]
-
[mm]
[pixels]
[frames/s]
[mm]
[ ]
O
[mm]
-
[mm]
[ O C]
[%]
[h]
[g]
I N S T R U C T I O N S
Value
YT-7290 YT-7291
9 D.C. (6LR61*)
LCD TFT
88.9 (3.5") 61 (2,4")
320 x 240
30
12.2
60
25 - 300
2 x LED
900
10 - 50
5 - 95, without condensation
2
460 430