Technical Parameters; Safety Recommendations - YATO YT-7292 Manual De Instrucciones

PROPERTIES OF THE DEVICE
The industrial videoscope is a portable inspection device. It permits to see hardly accessible areas by means of a miniature cam-
era connected with a fl exible cable to a LCD colour screen whose diagonal is 89 mm. The camera of the device is equipped with
autonomous illumination based upon white LEDs, which permits to work even in total darkness.
COMPONENTS OF THE DEVICE
YT-7292
The device is provided complete and it does not require assembly. The package contains the following: videoscope with a camera,
screen, power pack, branch-joint of the charging cord. Along with the device are provided the following auxiliary terminals of the
camera: with a hook, with a mirror and with a magnet.
YT-7293
The device is provided complete and it does not require assembly. The package contains the following: videoscope with a camera,
screen, power pack, branch-joint of the charging cord, USB cable, Micro SD memory card (2GB), TV cable. Along with the device
are provided the following auxiliary terminals of the camera: with a hook, with a mirror and with a magnet.

TECHNICAL PARAMETERS

Parameter
Catalogue number
Power supply
Type of battery
Capacity of the battery (videoscope/screen)
Charging time
Type of screen
Diagonal of the screen
Picture defi nition of the screen
Refresh rate for the screen
Diameter of the camera
Visual fi eld of the camera
Focusing distance of the camera
Camera lighting
Length of the camera conductor
Working temperature
Workplace relative humidity
Maximum working time
Frequency of the wireless transmission (CH1; CH2; CH3; CH4)
Wireless transmission range (max.)
Type of the supported memory card
Supported capacities of the memory cards
Power pack
Input voltage
Frequency of the input voltage
Output voltage
Output current
Weight of the device (with the batteries)
Protection grade

SAFETY RECOMMENDATIONS

NOTE! Read carefully the following instructions before you commence work. Should the recommendations be not observed, there
is a risk of an electric shock, fi re or injuries.
The place of work must be properly lit and clean. Untidiness and poor lighting may be a cause of accidents.
Do not use the device in an explosive environment which contains infl ammable liquids, gases or vapours.
Do not use the device in the vicinity of corrosive chemicals; they may impair the obtained picture.
Do not remove any labels from the device.
Do not permit children or unauthorised persons to the place where the device is being operated. A loss of concentration may lead
to a loss of control over the tool.
O R I G I N A L
GB
Measurement unit
-
[V]
- lithium polymer
[mAh]
[h]
-
[mm]
[pixels]
[frames/s]
[mm]
[ ]
O
[mm]
-
[mm]
[ C]
O
[%] 5 - 95, without condensation
[h]
[MHz] 2414; 2432; 2450; 2468
[m]
-
[GB]
[V]
[Hz]
[V]
[A]
[g]
I N S T R U C T I O N S
Value
YT-7292 YT-7293
3.7 d.c. 3.7 d.c.
lithium polymer
1200/ 1350 1200/ 1350
~3.5
LCD TFT LCD TFT
88.9 (3.5") 88.9 (3.5")
320 x 240 320 x 240
30
12.2
60
50
2 x LED 2 x LED
900
10 - 45 10 - 45
5 - 95, without condensation
2 - 3
2414; 2432; 2450; 2468
10
- Micro SD, Micro SDHC
-
230 a.c. 230 a.c.
50
5,5 d.c. 5,5 d.c.
1.5
530
IP20
~3.5
30
12.2
60
50
900
2 - 3
10
do 16
50
1.5
530
IP20
11