Metra 99-7880B Manual De Instrucciones página 5

ISO DIN head unit provisions
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the factory radio brackets to the
head unit with the screws supplied with
the unit. (Figure A)
3. Mount the Metra pocket to the brackets
using the supplied screws. (Figure A)
4. Mount the radio assembly into the dash
and snap the radio housing panel over
the radio asembly. (Figure B)
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7880B
5
(Figure A)
(Figure B)