Machine Information; Technical Specifications - VONROC SG501DC Traducción Del Manual Original

SPECIFIC SOLDERING IRON SAFETY
INSTRUCTIONS
Risk of fire! When putting the soldering iron
down, make sure that the hot tip does not
come into contact with combustible
materials. Do not leave the device
unatten ded while it is hot. Allow it to cool
down before you store it away.
The soldering tip reaches temperatures of
about 450°C. Touching the metal parts can
cause severe burns.
The device must always be placed on a
non-combustible surface when it is not in
use. There is a potential fire hazard.
WARNING! This tool must be placed on its
stand when not in use.
• This appliance can be used by children aged
from 8 years and above and persons with redu-
ced physical, sensory or mental capabilities or
lack of experience and knowledge if they have
been given supervision or instruction con-
cerning use of the appliance in a safe way and
understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be
made by children without supervision.
• Always turn the device on before it comes into
contact with the material that is to be worked on.
• Vapours which are harmful to health are produ-
ced during the soldering process. Ensure good
ventilation or suitable vapour removal.
• Protect your eyes with safety goggles and your
body with suitable working clothes against
solder splashes and corrosive vapours.
• The device must never be used for heating up
liquids or plastics.
• Never leave the device unattended when it is
switched on.
• Ask our service centre to carry out any work
that is not described in these instructions. Use
only original parts.
• This tool must be placed on its support when
not in use.
• Use only the battery charger supplied.
• The appliance cannot be used to weld plastic
material.
WWW.VONROC.COM

2. MACHINE INFORMATION

Intended use
The cordless soldering iron is suitable for soldering
electronic components. This appliance is designed
for domestic use. This soldering iron is suitable for
soldering on printed circuit boards, soldering of
plastic and for burning work on wood and leather.
All other applications are specifically excluded.

TECHNICAL SPECIFICATIONS

Model No.
Rated voltage
Power
Battery capacity
Insulation class
Protection class
Pre heating time
Temperature
Automatic shutdown
Weight (machine)
Recommended USB Charger adapter
Rated output
Recommend output current
Operating and storage temperature
Charge
Discharge
Storage
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. Soldering tip
2. Soldering tip holder
3. Soldering iron
4. On/Off switch
5. Soldering iron base
6. Sponge
7. Solder wire
8. Charger cable
9. LED indication light
10. LED Worklight
EN
SG501DC
4V DC Li-ion
Max 8W
1500mAh
III
IP20
25 sec
Max 450°C
After 10min
0.11kg
USB 5V DC
1000-2000mA
0~+45°C
-20~+60°C
-5~+35°C
5