Dyson Supersonic Manual Del Usuario página 4

Ocultar thumbs Ver también para Supersonic:
Tabla de contenido

Publicidad

6. This appliance has a non-
self resetting thermal cut-out
safety device to prevent
overheating. If your appliance
cuts out, unplug it from the
mains supply socket and leave
to cool.
7. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must
not be supplied through an
external switching device, such
as a timer, or connected to a
circuit that is regularly switched
on and off by the utility
company, or plugged into any
socket where the electrical
supply is unstable or likely to
be turned off.
8. When the appliance is used
in a bathroom, unplug it
after use since the proximity
of water presents a hazard
even when the appliance is
switched off. For additional
protection when the appliance
is used in a bathroom, it is
recommended that a Residual
Current Device (RCD), with
a residual operating current
not exceeding 30 mA is
installed in the electrical circuit
supplying the bathroom.
Contact a qualified electrical
installer for advice.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido