Kalorik USK DO 3618 Manual De Instrucciones página 6

Fax +32 2 359 95 50
Caution: Avoid contact with the cut edges of the can or lids, as they
are sharp. Carefully remove the lid from the magnet and discard
immediately.
Note: the quantities of the cans opened each time do not exceed 5
pieces
7. You may stuff excess lengths of cord into the back storage of the
unit and feed the cord through the notch for convenient storage.
Note: Can Opening tips
1. This can opener should not be used to open cans designed to be
opened by another method, such as a pull tab, peel-off foil seal,
or rolling key. This can opener will not open rimless cans or cans
with angled corners.
2. If there is a dent in the rim of a can, open the other end or start
the cutting action just beyond the dent. Cans with heavy seams,
uneven rims or odd shapes may cause the can opener to stall, If
this occurs, turn the can slightly by hand to aid the cutting action.
3. Frozen juices or foods in cardboard cans should be opened as
soon as they are removed from the freezer.
4. Aluminum lids will not stick to the magnet.
TO OPEN BOTTLES
1. To open a bottle, grasp it and position the cap under the metal
hook part in the bottle opener (see Fig. 4).
Important: Be sure the metal hook part is not under the bottle neck,
or the glass may break. Hold the can opener with one hand and pull
down to pop the cap off with the other one.
2. The bottle opener at the front of the unit will only remove metal
bottle caps. Do not use it for screw-off caps, punch in tabs, or on
cans with pull ring.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
6
Assembly page 6/20
special instruction from Team
Print only
USK DO 36918 - 110808