Emptying The Water Tank - Westinghouse WST5019ME Serie Manual De Instrucciones

NOTE: Steam can be stopped by holding the Iron in the ver-
tical position, or by pressing the Steam Button back into the
NO STEAM position.
CAUTION: AVOID COMING IN CONTACT WITH ESCAP-
ING STEAM.
8. When finished ironing, press the Steam Button into the NO
STEAM position, turn the Temperature Control Dial to the
"MIN" setting, and unplug the Iron. If necessary, empty the
Water Tank (see "Emptying the Water Tank"). Stand the Iron
back in the vertical position (on its Heel Rest) and allow it to
cool completely before cleaning or storing.
NOTE: The Water Tank should be emptied after each use.

Emptying the Water Tank

The Water Tank should be emptied after each use.
1. After use, press the Steam Button into the NO STEAM posi-
tion, turn the Temperature Control Dial to the "MIN" setting,
and unplug the Iron.
2. While the Iron is still warm, hold the Iron over a sink and
turn the Iron upside down, allowing water to drain from the
Water Fill Opening.
3. Stand the Iron back in the vertical position (on its Heel
Rest). The warmth of the Iron should dry out any remaining
water.
CAUTION: AVOID COMING IN CONTACT WITH WATER OR
ESCAPING STEAM.
7