Setting The Display Contrast; Setting The Time And Date - GE 29897 Guia Del Usuario

Remote Access
TONE/PULSE Dialing
Regional Area Codes
During the course of setting up the phone, you can press the DELETE button to scroll back to
the previous Setup menu.
S D
ETTING THE
This setting allows you to adjust the display contrast for easier readability.
1. Press and release the MENU button until SET CONTRAST is displayed. The unit
announces, "Setup menu. To change setting, use NEXT or REVIEW. To save a setting, press ENTER."
2. Use NEXT or REVIEW to select the desired setting or press the keypad number for the
setting (1-5).
3. When finished, press ENTER to confirm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.
S T
ETTING THE
NOTE: If you have subscribed to the Caller ID display feature from your telephone
company, the telephone company sends the time and date with the Caller ID informa-
tion. The unit automatically sets the time and date when the first call is received.
H
OUR
1. If you just adjusted the Display Contrast menu, skip to step 2. If you haven't adjusted any
other setting, press and release the MENU button until SET TIME/DATE is displayed.
2. Use NEXT or REVIEW to set the hour.
3. When finished, press ENTER to confirm. Now you're ready to enter the minutes.
M
INUTES
1. Use NEXT or REVIEW to set the minutes.
2. When finished, press ENTER to confirm. Now you're ready to enter the time of day, AM
or PM.
AM/PM
1. Use NEXT or REVIEW to set the time of day.
Sets your 3-digit code used for remote access to the unit.
Sets the phone for tone or pulse dialing.
Sets your regional area codes if you have multiple area codes
where you live.
C
ISPLAY ONTRAST
D
IME AND ATE
11