Changing The Battery; Battery Safety Precautions - GE 25859 Guia Del Usuario

The base display shows REMOTE ACCESS ANSWERING CALL .
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
C
HANGING THE
CAUTION: To reduce the risk of fire or
personal injury, use only the battery 5-2548 that
is compatible with the unit.
Make sure the telephone is OFF (not in TALK
mode) before you replace battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside
the battery compartment and remove the battery
pack from the handset.
3. Insert the new battery pack and reconnect the
battery plug to the jack inside the compartment.
4. Put the battery compartment cover back on.
5. Place handset in charge cradle to charge. If you
don't charge the handset battery properly (for
12 hours) when you first set up the phone and/
or when you install a new battery pack, the
battery 's long-term performance will be compromised.
NOTE: If the battery is not installed in the handset or the battery pack is not
properly connected in the compartment, "NO BATTERY" shows in the display
when the handset is placed in the base cradle.
B S
ATTERY AFETY
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
B
ATTERY
P
RECAUTIONS
37