Installation - Sanyo EM-S5002W Manual De Instrucciones

INSTALLATION

Remove all packing material and accessories. Examine the oven for any
damage such as dents or broken door. Do not install if oven is damaged.
NOTE: This unit is not designed for 50 Hz or any circuit other than a
120-volt/ 60-Hz AC circuit. This oven is designed for countertop installation.
Countertop Installation
1. Select a level surface that
provides enough open space for
the intake and/or outlet vents.
A minimum clearance of 3 inches is
required between the oven and any
adjacent wall. One side must be open.
• Leave a minimum clearance of
3 inches above the oven.
• Do not remove the legs from
the bottom of the oven.
• Blocking the intake and/or
outlet openings can damage
the oven.
• Place the oven as far away
from radios and TV's as possible.
Operation of microwave oven
may cause interference to your
radio or TV.
• If the cabinet is covered with a
protective film, remove the film.
2. Plug your oven into a standard
120-volt / 60-Hz household
outlet. Be sure the electrical
circuit is at least 15 amperes
and that your microwave oven
is the only appliance on
the circuit.
WARNING: Do not install oven
over a range cooktop or other
heat-producing appliance. If
installed near or over a heat source,
the oven could be damaged and the
warranty would be void.
9