The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
WARNING! Read all the safety and gen-
eral instructions. Failure to observe the
safety and general instructions may res-
ult in electric shock, fire and/or serious
injury.
GAS 12-25 PL: Dust extractor from dust
class L in accordance with IEC/EN
60335-2-69 for the dry extraction of
harmful dusts with an exposure limit of
3
> 0.1 mg/m
Do not hang the dust extractor on a
crane hook, e.g. in order to transport
it. The dust extractor is not suitable for
moving with a crane. There is a risk of in-
jury and damage if you do this.
Do not sit or stand on the dust ex-
tractor. The dust extractor may tip over
and become damaged if you do this. This
poses a risk of injury.
GAS 12-25
Switching Off
Extraction
Extracting dust deposits
GAS 12-25 PL
Automatic start/stop
Extracting dust that accumulates from
Bosch Power Tools
Symbols and their meaning
working power tools
The dust extractor switches on automat-
ically and off again with a time delay
Switching Off
Extraction
Extracting dust deposits
Permitted connected load of the connec-
ted power tool (country-specific)
Product Description and
Specifications
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The tool is intended for collecting, vacuuming, conveying
and separating non-flammable dry dust types, non-flam-
mable liquids and a mixture of water and air. It is suitable for
the increased demands in professional use, e.g. in trade, in-
dustry and workshops, as well as for household/domestic
use.
GAS 12-25 PL:
The dust extraction capability of the dust extractor has been
tested and corresponds to dust class L.
Dust extractors from dust class L in accordance with IEC/EN
60335-2-69 may only be used to vacuum and extract harm-
ful dust with an exposure limit of > 1 mg/m
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.
Product features
The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) On/off switch (GAS 12-25)
(1) Mode selector switch (GAS 12-25 PL)
(2) Socket for power tool (GAS 12-25 PL)
(3) Hose connection piece (vacuuming function)
(4) Pull strap
(5) Castor brake
(6) Castor
(7) Container
(8) Wheel
English | 9
Read all the safety and
general instructions. Fail-
ure to observe the safety
and general instructions
may result in electric shock,
3
.
1 609 92A 6PH | (31.05.2021)