Tools And Materials; Product Information - Kohler K–10970 Guia De Instalacion

Tools and Materials

Strap
Hacksaw
Wrench
• Optional 20-micron Water Filter
• Copper Tubing
• 3/4" x 11.5 N.P.T. Threaded Adapter (not provided)
• 6.0 volt 1300 mAh Lithium Battery
#2CR5, DL245, EL2CR5, KL2CR5, or 2CR5M
Propane Torch
NOTE: For the retrofit version K-10975, only the strap wrench,
flat-bladed screwdriver, and battery are required for installation.
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and web site are listed on
the back cover. Thanks again for choosing Kohler Company.

Product Information

A filter screen is provided in order to protect the solenoid valve from
damage. If water quality is poor, a 20-micron filter should be installed
on the supply.
1025497-2-A
Blade
Safety Glasses
Screwdriver
Plus:
2
Solder
Kohler Co.