Tools And Materials; Before You Begin - Kohler K-10949 Guia De Instalacion

Tools and Materials

Strap
Wrench Hacksaw
Thread Sealing
Compound

Before You Begin

IMPORTANT! The sticker covering the sensor eyes must remain in
place when valve is not installed.
Install the fixture according to the manufacturer's instructions.
Install rough water supply piping according to the roughing-in
illustration.
Flush the supply piping in order to remove any debris from the
supply line.
Shut off the main water supply.
This atmospheric vacuum breaker shall not be subjected to a
continuous pressure for more than twelve hours.
The device shall be installed in accordance with the requirements
of the local plumbing code.
The device shall not be installed where the venting of water from
the device, during normal functioning, causes damage.
The device shall be installed downstream of the last valve.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Important Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
1104277-2-A
Blade Safety
Screwdriver Glasses
2 Kohler Co.