6
8.3 Armrest
According to the wheelchair model you have chosen, the armrests are:
8.4 Install/remove the swing away legrest
8.5 Adjust the swing away legrest
• Flip-up, detachable, height adjustable and sliding
(CP790-xx);
• Flip-up, detachable and height adjustable
(CP785-xx);
• Flip-up and detachable
(CP780-xx, CP775-xx, CP770-xx).
To flip-up the armrests, unlock the armrest by pushing the
front release lever and then overturn them.
WARNING!
Never lift the wheelchair by the armrest.
(FIG.4)
Image for illustrative purposes only
•
Assembly the swing away or elevating legrest
by installing the hinge plates on the footrest
into the hinge pins on the wheelchair frame.
Push the legrest toward inside of the wheelchair
until it locks into place
•
Remove the legrest by pushing the legrest release
lever in ward, rotate outward, lift the legrest off the
hinge pins
(FIG.5)
Image for illustrative purposes only
•
To adjust the length of the footrest, unscrew
the nut lever at the bottom on the left side,
slide the tube until the desired position.
Then screw the nut to fix it.
Image for illustrative purposes only
(FIG.6)
(FIG. 4)
(FIG.5)
(FIG.6)