Matco Tools MTHVLP13 Guia De Inicio Rapido

WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe,
accessible place.
INTENDED USE OF THE TOOL
This tool is intended to be used to spray the following solvent and
waterborne light to medium viscosity materials:Enamels, lacquers,
polyurethane, urethane top coats, urethane basecoat and urethane
clearcoat. Materials which are acidic, abrasive and/or contain
benzene must not be used. In order to achieve the best results,
surface and paint preparation must be completed in accordance
with paint manufacturer's instructions and recommendations.
BEFORE USE
Before use, check the parts diagram and part number listing on
page 3 to make sure all parts are included. If any parts are missing
or damaged, please call your distributor.
PRODUCT INFORMATION
Unmatched. Forged and CNC machined HVLP gun designed
exclusively for professionals and ultra premium base-coats.
Get more. Includes AR45 Deluxe Diaphragm Regulator, adapter
for 3M PPS use, patented dripless cup, filter and custom brushes.
Spend less on paint and time. The latest in design technology
allows for higher transfer efficiency with less over-spray and CFM
usage compared to top brands, all while providing a larger spray
pattern that requires less overlap.
SPECIFICATIONS
Tip Size : 1.3mm/1.4mm
Air Inlet : 1/4" NPS (M)
Fluid Inlet : M16 x P1.5
Air Inlet Pressure : 29psi
DO NOT DISCARD – GIVE TO USER
HVLP ELITE SPRAY GUN
Made in Taiwan
to Matco specifications
Air Cap Pressure : 9.2psi
Air Consumption : 14.5 CFM
Spray Pattern: 12" from 7.5"
distance
Page 1
2 YEAR LIMITED WARRANTY
2 year warranty applies to spray gun. 1 year warranty for AR45
Regulator. Other accessories are consumable.
The manufacturer warrants this product to the original user against
defective material or workmanship for a period of 1 year from the
date of purchase.
The manufacturer reserves the right to determine whether the part
or parts failed because of defective material, workmanship or other
causes. Failures caused by accident, alteration or misuse are not
covered by this warranty.
The manufacturer, at its discretion, will repair or replace product
covered under this warranty free of charge. Repairs or replacements
of products covered under this warranty are warranted for the
remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by
unauthorized service representatives voids this warranty. The rights
under this warranty are limited to the original user and may not be
transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular
purpose. Some states do not allow the exclusion or limitations of
incidental or consequential damages, so the above limitations may
not apply to you.
Authorized Matco Repair Centers:
United States
Matco Air Tool Repair SV
1330 Commerce Drive
Stow, OH 44224
(800) 433-7098
NMG Industrial WTRC
Attn: South Dock
2223 S. Wilson Street
Tempe, AZ 85282
Caution: To help prevent personal injury
Use of this product can expose you to chemicals including ethylene
glycol, gasoline vapors and engine exhaust, which are known to the
State of California to cause cancer, birth defects, or reproductive
harm. For more information, visit www.P65Warnings.ca.gov. Always
wear ANSI approved safety equipment, safety glasses and clothing
when using this product. Study, understand, and follow all
instructions provided with this product. Failure to read and follow
all warnings and operating instructions may result in damages and
serious injury or death.injury or death.
• Always wear appropriate respirator and eye protection.
• Never use this tool for any application other than for which
it was designed.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool, modification
of the tool or use of the tool with accessories not designed for it
could result in serious injury or death.
• Always select the correct accessories of the correct size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and adequately
equipped area.
MTHVLP13
MTHVLP14
Canada
H. T. Pneumatic Rebuilders Inc.
22 Goodmark Place
Units 7 & 8
Toronto, Ontario M9W6R2
1809274-14