Comfort Home EQS4280 Instrucciones De Instalación Y El Manual De Propietario página 6

SERVICE INSTRUCTIONS
WARNING: Disconnect power and allow unit to cool completely before attempting any
maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.
REPLACING LIGHT BULBS
Access the bulbs through the rear access panel (see illustration below).
a. Turn the main power switch off, and then unplug the power cord from the wall outlet.
b. If the stove has been operating, let the unit cool at least 1 hour.
c. Loosen the 4 screws holding the access panel to the rear body of stove .
d. Remove bulbs and replace with 2× 40W E12 Chandelier Light Bulb, Candelabra Base.
e. Place rear access panel back into position and tighten screws (Do not over tighten
Required Tools: Phillips Head
screwdriver
40W E12 Chandelier Light Bulb,
Candelabra Base
GLASS INFORMATION
CAUTION: Even though the glass is safety glass it may break if bumped, struck or dropped. Care must be
taken when handeling the glass
1. Under no circumstances should this product be operated with missing or broken glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass.
4. Replacement glass is available from the manufacturer and replacement should be carried out
by a qualified service person.
Access Panel
Screws
~ 6 ~
).