Specifying the foot switch operation
When "ALt" is selected, pressing the foot switch repeat‐
edly cycles between bypassing and turning on the effects.
When the effects are turned on, the center of the LED
meter will light up.
When "A‐d" is selected, pressing the foot switch repeat‐
edly cycles through the programs in the order A
At this time, the current program (A–D) will appear on the tuner display.
When "0‐9" is selected, pressing the foot switch repeatedly cycles through the last
digits of the program numbers in the order 0
At this time, the last digit of the current program number (0–9) will appear on the
tuner display.
With the "A‐d" or "0‐9" settings, if the foot switch is pressed and held down, the
PANDORA stomp will enter Bypass mode, and the tuner will be activated.
Cabinet Effect Through function
When "On" is selected, the cabinet effect is forced off
(through). This setting is recommended when a guitar
(bass) amp is connected.
When "Off" is selected, the cabinet effect is switched on or
off depending on the program setting. This setting is recommended when head‐
phones are being used.
→
→
→
→
B
C
D
→
→
→
→
1
2
...
9
→
A
...
→
→
0
...
25