Publicidad
Idiomas disponibles
Idiomas disponibles
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal in the plug.
•
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension cable suitable
for the power input of your charger (see Technical Data). The
minimum conductor size is 1.5 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Rotary hammer
1 Side handle
1 Kitbox
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Red service indicator LED. For detailed description
see under Service Indicator LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator LED's.
Visible radiation. Do not stare into light.
; the maximum length
2
Date Code Position (Fig. A)
The date code
14
, which also includes the year of manufacture,
is printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch
1
Lock-on slider
2
Side handle
3
Main handle
4
Active vibration control
5
Mode selector switch
6
Electronic speed and impact control dial
7
Side handle clamp
8
Tool holder
9
Locking sleeve
10
Intended Use
The rotary hammers have been designed for professional rotary
drilling and chipping applications.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
These hammers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory
or mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for
their safety. Children should never be left alone with
this product.
Soft Start Feature
The soft start feature allows the tool to accelerate slowly, thus
preventing the drill bit from walking off the intended hole
position when starting.
The soft start feature also reduces the immediate torque
reaction transmitted to the gearing and the operator if
the hammer is started with the drill bit in an existing hole.
2018 XX XX
ENGLISH
17
Publicidad
