Amp: Amp Modeling - Korg PANDORA mini Manual De Usuario

C, D buttons (TYPE ▲, ▼)
PREAMP1*, PREAMP2*, BALANCE*
LOWCUT*
FRETLES*

AMP: Amp Modeling

In order to take full advantage of the characteristics of Amp Modeling, we rec‐
ommend that you use it in conjunction with Cabinet Modeling when listening
through headphones or when recording from the line output. Types marked
by an asterisk (*) indicate effects for bass guitars.
If you have selected SYNTH as the effect type, use the Value dial on each
parameter page to set the filter depth and decay, and to select and adjust the
waveform (see p.36).
C, D buttons (TYPE ▲, ▼)
BTQ CLN, BTQ OD, TWD1X12,
TWD4X10, BLK2X12, AC15, AC30,
AC30TB, UKBLUES, UK '70S, UK '80S,
UK MDN, US HI-G, US MDN, FUZZ
Value Dial
Adjusts tone. (
0.0–10.0)
Specify the frequency.
Adjusts tone.
(0.0–10.0)
VALUE (Value Dial) on each parameter page
Disabled when the TYPE is displayed.
amount of distortion.
<GAIN>:
high range.
<TREBLE>:
mid range.
<MIDDLE>:
low range.
<BASS>:
(0.0–10.0)
(0.0–10.0)
(0.0–10.0)
(0.0–10.0)
(0.0–10.0)
35