Connection - Toshiba dynadock U3.0 Manual Del Usuario

dynadock™ U3.0

Connection

1. Plug the AC adaptor cord/cable into the DC-IN jack on the back of the
dynadock.
(Sample Illustration) Connecting the AC adaptor cord to the dynadock
2. Connect the AC power adaptor with the AC power cord/cable, and then
connect the AC power cord/cable to a live electrical outlet. The power
light on the front panel glows blue when the dynadock is powered ON.
Always use the TOSHIBA AC adaptor that is provided with this product or
CAUTION
use TOSHIBA recommended alternate adaptors to avoid any risk of fire
and/or other damage to the product. Use of an incompatible AC adaptor
could cause fire and/or damage to the product, possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
EN-18 User's Manual