General Instructions - Skytec LED Par 56S/156-5mm Manual De Instrucciones

Introduction
Unpacking: Thank you for purchasing the LED Par 56S/156-5mm. Every LED Par 56S/156-5mm has
been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to
operate the unit has arrived intact. In the case damage has been found or parts are missing, please
contact the manufacturer or your dealer for further instructions. Do not return this unit to your dealer
without first contacting.
Introduction: The LED Par 56S/156-5mm is a DMX intelligent Par Can. This Par Can is light weight
and compact which makes it a great piece for mobile DJ's and clubs. This unit can be used as a stand
alone, or a sound-active mode. The unit can also be controlled via DMX controller.
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself;
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton when ever possible.

General Instructions

To optimize the performance of this product, please read these operating instructions carefully to
familiarize you with the basic operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please keep this manual with the unit, for
future reference.
Features
Multi-Colors
Color Strobe
Electronic Dimming 0-100%
Built in Microphone
Safety Precautions
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet match that of the required voltage for your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to
remove or break off the ground prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and fire in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never operate this unit when it's cover is removed.
Never plug this unit in to a dimmer pack.
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6" (15cm)
between this device and a wall.
DMX-512 protocol
Master/Slave synchronization
Daisy Chain Units Together in DMX
Mode
2