Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX
controller. Set your desired DMX address following the setup specifications that come with your
DMX controller.
Settings of Different Control Modes:
DIP
1
2
3
Standby
0
0
0
DMX
X
X
X
Mode
Dimming
X
X
X
Strobe
X
X
X
Sound
X
X
X
Active
Fantastic
X
X
X
Changing
Multi
X
X
X
function
Master &
1
0
0
Slave
Note: "1" means the DIP switch must be ON; "0" means the DIP Switch must be OFF; "X" means the
DIP switch can be either ON or OFF, depending on what function you to set with the par can.
DMX Values and Functions
Channel
1
2
3
4
5
4
5
6
7
8
9
0
0
0
0
0
0
X
X
X
X
X
X
X
X
X
X
X
0
X
X
X
0
0
1
X
X
X
1
0
1
X
X
X
0
1
1
X
X
X
1
1
1
0
0
0
0
0
0
Value
0-255
0-255
0-255
0-255
0-255
10
Function
0
Standby Mode
DIP Switch 1-9 are for setting of DMX codes.
1
0
DIP Switch 1-3 for red; 4-6 for blue; 7-8 for green
DIP Switch 1 for red; 2 for green; 3 for blue. 4-6
0
for speed of strobe.
Sound Activation Mode
0
DIP Switch 1-6 for the changing speed.
0
DIP Switch 1-6 for the changing speed.
0
The one connected with source of DMX signal is
1
the master; all others are the slaves in the synchr.
chain.
Function
Master Dimmer for the R, G and B
channels
Red, dimmer 0-100% when CH1 within
0-125; strobe from fast to slow when CH1
within 126-255
Green, dimmer 0-100% when CH1 within
0-125; strobe from fast to slow when CH1
within 126-255
Blue, dimmer 0-100% when CH1 within
0-125; strobe from fast to slow when CH1
within 126-255
Master Strobe for the R, G and B channels
4
Publicidad
Tabla de contenido
