Publicidad
Idiomas disponibles
Idiomas disponibles
• Any deviation from the intended use
and/or any misapplication of the tools
is not permitted and will be considered
as improper use.
• Any claims against the manufacturer and/
or its authorised agents because of damage
caused by improper use of the tools are
void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
3. Dangers that may arise
from using the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its functio-
nal efficiency cannot be ensured or if damage
is detected. If you use the tool despite full
functionality not being guaranteed, this poses
a risk of serious injury, health problems and
material damage.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or hou-
sing parts.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
2
For your safety
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
• Wear working gloves and
safety glasses.
Pneumatic tools can dis-
perse
chips,
dust
other
abraded
at high speed which may
result in severe eye injuries.
Compressed air is dan-
gerous. The air flow may
cause harm to sensitive parts
of the body like eyes, ears,
etc. Dust and objects being
raised by the air flow may cause injuries.
• Wear hearing protection.
Long exposure to the wor-
king noise of pneumatic tools
may result in permanent hea-
ring loss.
• Wear a face mask or brea
thing protection. Breathing
in the vapour of some materi-
als like adhesives and chemi-
cals containing tar can, over
a prolonged period, cause
serious harm.
• Wear tightfitting protective
clothing. Tools with moving
parts can get caught in your
hair, clothes, jewellery or
other loose objects, which
can lead to serious injury.
Never wear clothing that is
too loose and/or clothing with bands or
loops, etc. which may get caught in the
moving parts of the tool. During the work,
take off jewellery, watches, identification
tags, bracelets, necklaces etc. that could get
caught in the tool. Never touch the moving
parts of a tool. Long hair should be tied back
or covered.
• Keep pneumatic tools out of the hands of
children. Unattended tools or tools that are
connected to the compressed air supply may
be used by unauthorised persons and could
cause injury to them or to other persons.
and
particles
13
Publicidad
