Intended Use; How To Use - monzana Deuba DHN001-1 Manual Del Usuario

ATTENTION! Read the safety and assembly instructions carefully, in order to
avoid the risk of injury or damaging the product.
Important: Read these instructions carefully and thoroughly. Keep these
instructions to read through at a later date. If you give the product to
anyone else at some point in the future, please ensure you also pass on this
manual
Only for domestic use and not for
commercial use!
Keep small parts, plastic bags and other packaging out of the reach of children.
Pay attention especially when unpacking your item. Danger of suffocation!
Check the delivery for completeness. Later complaints cannot be accepted.
Check all elements and parts for damages. Despite careful control, products may be
damaged in transit. In this case, do not assemble your product. Defective parts can en-
danger your health.
Never modify the product! Changes will void the warranty and the product may
be unsafe or even dangerous.
Unpack all the parts and elements of the set and place the components on the top of
the carton or other clean surface. This protects your new product.
Please also pay attention not to scratch the floor while working with tools.
Make sure that this product is fully assembled before use, as shown in the illustration
For cleaning use a sponge and warm soapy water.
Do not use solvent based-cleaners or detergents - for example bleach. Those can dam-
age the product.
Tool for the controlled tightening of bolts and nuts with a preset force. Use the product
only for its designed purpose of use. Manufacturer will not assume any responsibility in
case of damages cause of an unappropriated use. Any modification applied by customer
on the original product will have a negative impact on its safety, cause danger and
warranty will be canceled.
This torque wrench is a testing device and is intended for tightening screw connections
with right-hand or left-hand thread. Never use this torque wrench to loosen screw
connections of any kind!
a) Balancing wrench in hand with graduations visible with the marked arrow
Elementary Scale up, then unlock knurled handle by lurning lock nut counter clockwise.
b) Set amount of torque required by turning knurled handle to read exact amount on
INSTRUCTIONS

Intended Use

How to Use

www.DeubaXXL.de
5