Product Description And Specifications - Berner BACMC-10,8V LI Manual Original

OBJ_BUCH-890-004.book Page 16 Wednesday, August 19, 2015 9:45 AM
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e.g. nails, staples).
It is also suitable for working soft wall tiles as well
as for dry sanding and scraping of small surfaces.
It is especially suitable for working close to edges
and for flush cutting.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Battery unlocking button
2 Battery pack
3 Button for charge-control indicator
4 Battery charge-control indicator
5 Thumbwheel for orbit frequency preselection
6 On/Off switch
7 Venting slots
8 Tool holder
9 Handle (insulated gripping surface)
10 Plunge saw blade*
11 Clamping bolt with spring washer
12 Hex key
13 Adapter for tool holder*
14 Sanding plate*
15 Sanding sheet*
16 Felt ring of the dust extraction*
17 Retaining clip of the dust extraction*
18 Vacuum connection*
19 Dust extraction*
20 Vacuum hose*
* The accessories illustrated or described are not in-
cluded as standard delivery.
16 | English
Technical Data
Precision Saw
Art. No.
Rated voltage
No-load speed n min
0
Oscillation angle,
left/right
Weight according to
EPTA-Procedure
01:2014
Permitted ambient
temperature
– during charging
1)
– during operation
and during storage
Recommended
batteries BACP 10,8 V S-B x.x Ah
Recommended
chargers
1) Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product
are: Sound pressure level 84 dB(A); Sound power
level 95 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to EN 60745-2-4:
2
Sanding: a =2.6 m/s , K=1.5 m/s
h
Sawing with plunge cut saw blade: a
2
K=1.5 m/s ,
Sawing with segment saw blade: a
2
K=1.8 m/s ,
2
Scraping: a =17.3 m/s , K=1.6 m/s
h
The vibration level given in this information sheet has
been measured in accordance with a standardised
test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the
vibration emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the op-
erator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
BACMC-10,8V LI
243730
V= 10.8
-1
5000–20000
° 1.4
kg 1.0
°C 0...+45
°C –20...+50
BACC 10,8 V S
2
,
2
=13.1 m/s ,
h
2
=12.2 m/s ,
h
2
.
1 609 92A 1DR • 19.8.15