Tool Specifications; Noise/Vibration Information; Intended Use; Machine Elements - Berner BJS-SHO 135 Instrucciones De Servicio

BJS 135.book Seite 4 Montag, 15. November 2004 10:10 10

Tool Specifications

Jigsaw
Part number
Jigsaw
Part number
Rated input power [W]
Output power [W]
Stroke rate at no
load [spm]
Stroke [mm]
Stroke Rate
Preselection
Constant
Electronic Control
Cutting capacity, max.
Wood [mm]
Aluminium [mm]
in non-alloy steel [mm]
Bevel cuts
(left/right) [°]
Weight according
to EPTA-
Procedure
01/2003 [kg]
Protection class
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.

Noise/Vibration Information

Measured values determined according to
EN 60 745.
Typically the A-weighted sound pressure level of
the machine is 84 dB (A). Measurement uncer-
tainty K=3 dB.
When working, the noise level can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s

Intended Use

The machine is intended for making separating
BJS-TH 135
cuts and cut-outs in wood, plastic, metal, ceramic
016345
plates and rubber while resting firmly on the
BJS-SHO 135
workpiece. It is suitable for straight and curved
016346
cuts with mitre angles to 45°. The saw blade rec-
720
ommendations are to be observed.
310

Machine Elements

500 – 2 800
26
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
135
1 Vibration damper
20
2 Lock-on button for On/Off switch
10
3 On/Off switch
0 – 45
4 Stroke rate preselection thumbwheel
5 Vacuum hose*
2.7 (BJS-TH 135)
6 Vacuum connection*
2.6 (BJS-SHO 135)
7 Base plate with mit interior extraction
/ II
8 Sliding shoe for base plate*
9 Switch for sawdust blowing device
10 Lever for adjustment of pendulum action
11 Pushbutton for Precision Control
12 Stroke rod
13 Guide roller
14 Precision Control guide
15 Saw blade*
16 Contact protector
17 Dust cover for vacuuming*
18 SDS clamping lever for saw blade release
19 Scale for mitre angle
20 Angle gauge**
2
.
21 Thumbwheel for pre-tension of base plate
22 SDS lever for base-plate adjustment
23 Splinter guard
24 Circle cutter/parallel guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
items)
English - 4
(BJS-TH 135)
channel