To Use; Attachments - Beurer MP 62 Manual De Instrucciones

Power supply:
To ensure adequate power at all times, this device includes a permanently attached power adapter.
WARNING
After use, before cleaning and changing any accessory parts, always unplug the power adapter from
the electrical outlet. Ensure that the Power Switch on the device is in the center position (off) before
connecting the device to an electrical outlet.

4. To Use

1. Select an attachment and push it gently onto the device spindle until it clicks into place. To remove, pull
the attachment and device apart.
2. Turn the Power Switch clockwise or counterclockwise to switch the device on. The blue LED illumi-
nates. Press the plus (+) and minus (-) Buttons to increase or decrease RPMs respectively. Start every
application at low speed and increase only as required.
3. All file and cutting attachments are coated with a sapphire grain. This ensures long life. Do not exert
heavy pressure and always guide the attachments carefully in circular movements slowly over the parts
to be treated.
4. Attachments will have a reduced effect if the skin is softened or moist. For this reason, do not use during
or immediately after bathing or showering.
5. In order to retain natural skin protection, do not remove all the callused skin.
6. Always ensure that the spindle can rotate freely. It must never be permanently jammed; otherwise, the
instrument will become too hot and suffer damage.
7. Check the results during treatment. This is particularly important for diabetics, since their hands and feet
are less sensitive.
8. After every use, apply moisturizing cream to the parts treated.

5. Attachments

Since the attachments are of a high quality and improper use can lead to injury, handle the attachments
carefully. Use extra caution when operating the device at high speeds.
The following attachments are included:
A – Sapphire cone
Removes dry skin and calluses from feet and manicures toenails.
B – Felt cone
Smoothens and polishes nails after filing and cleans nail surfaces. Always polish in
circular movements and do not allow the felt cone to rest in one place.
C – Fine Sapphire Wheel
Files and treats nails. Only the inner wheel rotates, while the outer support is stationary.
This enables precise filing of the nails without the risk of burning the skin.
D – Cylindrical Grinder
Grinds and smoothens toenails. Apply the milling cutter horizontally to the nail surface
and remove the unwanted toenail layer using slow circular movements.
E – Pointed Grinder
Removes ingrown nails. Carefully guide the pointed grinder to the part to be treated
and remove parts of the nail as necessary.
4